Skip to content
Description
Matek have crammed the FCHUB-12S with as many options as possible into their small and mighty power distribution board!
Like other PDB boards from Matek, this board connects with STD series flight controllers with minimal effort using the FFC ribbon cable.
PDB:
- Input voltage range: 8~60V (3~12S LiPo)
- 4x70A cont, 4x110A burst
- 4x ESC power /signal/ telemetry pads
- Current Senor: 440A, 3.3V ADC, Scale 75
- 2x LED indicators for 5V, 12V
FFC connection:
- Compatible with MATEKSYS FC F405-STD, F722-STD
- VTX: Video Transmitter signal
- T5 & R5: TX5 and RX5 of F405-STD/F722-STD
BEC 5V output (5V pad):
- Voltage: 5.0 +/- 0.1VDC
- Continuous current 5 Amps, Max.6A
- Short-circuit tolerant (2 seconds)
- Overcurrent protection & self-recovery
BEC 12V output (12V pad):
- Voltage: 12.0 +/- 0.2VDC (Input voltage >=12V)
- Continuous current 4 Amps, Max.5A
- Input voltage<12V, Output voltage = Input voltage
- Probably there is audible sound in the BEC12V inductor when Input voltage<12V
- Short-circuit tolerant (2 seconds)
- Overcurrent protection & self-recovery
Switchable 12V output (SW12V pad):
- 12V ON/OFF can be switched via PINIO
- can be use for powering VTX,LED etc.
BEC 3.3V output:
- Linear Regulator
- Continuous current: 500mA
Physical:
- Mounting: 30.5 x 30.5mm, Φ3mm
- Dimensions: 55 x 50 x 6 mm
- Weight: 21g
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.