Diatone Mamba F722 APP Flight Controller

The latest F7 processing technology means you can focus on flying, not on the limits of your equipment.  In addition to everything you would expect from an F7 FC, this mamba also includes an integrated WIFI module to make in-field changes to your configuration easy.

Note: The STM32F722 generates much heat, please leave at least 5mm on both sides of the FC to give good air circulation.

Diatone’s Mamba series gives racers an edge in competition. The latest F7 processing technology means you can focus on flying, not on the limits of your equipment, even in a 30×30 form factor FC.

With a wide range of setup options and features, you can configure your stack however you’d like.

Specifications

FIRMWARE TARGET /CONFIG： MAMBA F722 I2C

F722 Flight Controller

• MCU: 216MHz STM32F722RET6 32BIT
• IMU: MPU6000
• Barometer: No
• OSD: BF OSD
• Blacbox: 16M Flash Memory
• Uarts: 6Set
• ESC Soft: Dshot300/600/1200
• ESC Telemetry: RX6
• LED indicator: Blue&Orange for FC Status,Green 9V,White 5V,Red 3.3V
• WIFI: SpeedyBee APP
• Smartaudio: Yes
• Buzz: Yes
• Input: 3~6S Lipo (12.6~25V)
• TVS Protection: Yes
• BEC: 5V 2.5A & 9V 2A (Max 3A)
• MOUNTING: 30.5mm/M3 WEIGHT: 9g
• Supply : 8pin sh1.0 *1
• Smartaudio: Yes
• Buzz: Yes
• Input: 3~6S Lipo (12.6~25V)
• VTS Protection: Yes

Other

• FC Firmware: BetaFlight
• Target: MAMBA F722 I2C

Physical

• Mounting: 30.5×30.5mm, Φ3
• Weight: 6g total

Included:

1x MAMBA F722 APP Flight Controller