iFlight Protek35 Analogue ANALOGUE 3.5" 4s CINEMATIC MINI QUADCOPTER (PNP)

iFlight

  • £179.99
    Unit price . 


**Latest June 2021 version

The all-new 3.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we’re talking about here…

ProTek is not necessarily just a Cinewhoop series but far more. Equipped with all new 2203.5 motors for more power and less heat. We were able to increase speed and thrust by 50% compared to it’s 3inch predecessor which gives a lot more room for a lot more fun. Our GPS measured maximum speed was above 120km/h and a maximum thrust of 750g per motor (3kg in total) would even carry heavier cams than a Gopro but also do some loaded punch outs or light freestyle moves.

A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimisation).

Durable plastic protectors with copper standoffs, portable compact design, easy accessible UBS port without disassembly, LED battery status, lost model buzzer and a universal GoPro TPU for a full size or naked GoPro. If you wanna go extra light, get one of our 5V balance plug GoPro power cables to get rid of the internal battery

Features

  • No Props or frame in view!
  • High performance True-AIO Board Beast Whoop F7 AIO 45A to save weight and space
  • T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
  • Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
  • Low Resonance frame construction (Less Jello, more Cinematic footage)
  • RunCam Nano2 2.1MM NTSC 4:3 changed to RaceCam R1 Micro 1200TVL 1.8mm 14*14

  • Butter smooth 2203.5 3600KV (4S)
  • Pre-tuned with smooth freestyle settings
  • 1x ProTek35 Analog quadcopter BNF with RunCam Nano2 2.1MM
  • 2x TPU camera side plate soft mount
  • 2x Nazgul 3535 propeller (Set of 4 – Color May Vary)
  • 1x iFlight Lipo Strap 15*150mm (Color May Vary)
  • 1x iFlight Lipo Strap 15*250mm (Color May Vary)

ProTek35 BNF Specs:

  • – Board Beast Whoop F7 AIO 45A V1.2
  • – Motor: XING 2203.5 3600KV (4S)  
  • – Wheelbase: 151mm
  • – Body Size: 118*94.5mmmm
  • – Bottom plate thickness: 3.5mm
  • – Top plate thickness: 2mm
  • – Top and bottom plate spacing: 20mm (aluminum standoff height)
  • – Propeller size: 3.5 inch
  • – FC pattern: 25.5*25.5mm / 20*20mmmm
  • – FPV cam spacing: 20mm
  • – Weight: 305g (without battery)

FC // Beast F7 AIO

Specification:

  • MCU: BGA-STM32F745
  • Gyro: MPU6000
  • Blackbox: 8Mb Onboard Flash
  • BEC output: 5V 2.5A
  • Barometer: BMP280
  • Connector: Micro-USB
  • OSD: AT7456E
  • FC Firmware:IFLIGHT_F745_AIO
  • Mounting pattern: 25.5*25.5mm φ3mm
  • Dimensions: 32.5*32.5mm
  • Weight: 8.5g

ESC // 45A 2-6S

Specification:

  • Uarts: 5
  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Current scale: 200
  • Constant: 45A / Burst: 50A
  • BLHeli: BLHeli-S
  • Telemetry: no
  • ESC Firmware: BlheliS G-H-30
  • Mounting pattern: 25.5*25.5mm/Φ3mm
  • Dimensions: 32.5*32.5mm

VTX// SucceX Force 5.8g 800mW VTX Adjustable

  • – The output power is stable;
  • – Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
  • – Output 48 frequency points,
  • – Frequency lock fast, the boot does not interfere with companions;
  • – Built-in output power self-check function;
  • – Full format video format: NTSC /PAL;
  • – Wide input voltage range. low power consumption:
  •   7V~36V,+12V/380mA@800mW;
  • – Small size:36*36*3mm
  • – Mounting holes 4-M3
  • – Lightweight: 7.2g(excluding antenna)

Click here for the Protek35 6S 

**Important

A receiver is not included and will require some soldering. Depending on your radio we recommend the radiomaster RC8  or the TBS Nano they will require some soldering and configuration via Betaflight. (soldering service is offered)