Description
Specifications:
FC:
-
Latest STM32G4 processor
-
170Mhz + Math accelerator
- MPU6000
-
-
Designed for 12-25V supply voltage (3S-6S Lipo)
-
2x onboard BEC (max. 600mA each)
-
5V BEC for RX
-
5V / 16V BEC for VTX (configurable and real pit *)
-
-
1x 8 pin connector for solderless connection to VTX, camera and OSD of the digital systems
-
VCC, GND, Video in, Video out, BEC 5V / 16V, VCS / TX3, RX3
-
-
2x 4 pin connector for receiver and VTX
-
Signal, telemetry, 5V, gnd
-
Gnd, 5V, TX1, RX1
-
-
5 UART serials
-
UART 1 free
-
UART 2 occupied by the receiver
-
UART 3 free
-
UART 4 occupied by OSD, can be used differently depending on the configuration
-
UART 5 occupied by ESCs / TLM / Onewire
-
-
Solder pads for RGB LEDs
-
Supported ESC protocols
-
PWM, Oneshot125, Oneshot42, Dshot150 / 300/600/1200/2400, FETtec Onewire
-
-
KISS FC firmware
* real pit mode: switchable supply pad
ESC:
-
Active current limiting @ 35A
-
Input voltage: 3s-6s
-
High quality 40V MOSFETs
-
STM32G071 @ 64MHz
-
up to 128 kHz motor PWM
- Full sine wave control
-
Automatic input signal detection
-
PWM, Oneshot125, Oneshot42, Dshot150 / 300/600/1200/2400, FETtec Onewire
-
-
FETtec ESC firmware
OSD:
-
Onboard OSD
-
Graphic OSD (STM32)
-
Full KISS tuning
-
Filters (PIDs, Rates, Settings)
-
LED control (RGB LED, Racewire)
-
VTX
-
Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
-
KISS GPS support + live map
-
Custom graphic pilot logo
-
Stick overlay
-
Custom layout
-
can be deactivated for the use of digital systems
-
-
Connector type: JST-SH-1mm
Included:
1x FETtec AIO 35A
1x capacitor 50V 470µF
2x open 4pin cables (one-sided JST connector)
1x open 8pin cable (one-sided JST connector)
Standoffs
- Questions about the article?
- FETtec AIO 30Amp Manual (Please Read)
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.